NtupleAnalysis: HiggsAnalysis/HiggsAnalysis-00-01-00/run/Kt4TrackJet

00001 #----------------------------------------------------------------------
00002 #      jobOptions for JetRec package
00003 #      Kt 0.4 jets from TopoClusters
00004 #----------------------------------------------------------------------
00005 #----------------------------------------------------------------------
00006 # DLL Libraries
00007 #----------------------------------------------------------------------
00008 theApp.Dlls += [ "JetRec", "JetSimTools", "JetRecTools" ]
00009 #theApp.Dlls += [ "CaloUtils"]
00010 #----------------------------------------------------------------------
00011 # Algorithm steering
00012 #----------------------------------------------------------------------
00013 theApp.topAlg += [ "JetAlgorithm/Kt4TrackJets" ]
00014 # -- input container
00015 Kt4TrackJets = Algorithm( "Kt4TrackJets" )
00016 #Kt4TrackJets.InputCollectionNames = [ "CaloTopoCluster" ]
00017 Kt4TrackJets.JetCollectionName = "Kt4TrackJets"
00018 
00019 if not 'doJetMonitoring' in dir():
00020         doJetMonitoring = False
00021 
00022 # -- setup with jet monitoring
00023 if doJetMonitoring: 
00024     theApp.Dlls += [ "JetMonitoring" ]
00025     Kt4TrackJets.AlgTools = [
00026         "JetTrackSelectorTool/Track4Loader",
00027         "JetSignalSelectorTool/InitialEtCut",
00028         "JetDisplayTool/InputMonitor",
00029         "JetFastKtFinderTool/KtFinder",
00030         "JetDisplayTool/JetFinderMonitor",
00031         #"JetCellCalibratorTool/CellCalibrator",
00032         #"JetDisplayTool/CalibMonitor",
00033         "JetSignalSelectorTool/FinalEtCut",
00034         "JetSorterTool/Sorter",
00035         "JetDisplayTool/OutputMonitor" ]
00036 # -- setup without jet monitoring
00037 else:
00038     Kt4TrackJets.AlgTools = [
00039         "JetTrackSelectorTool/Track4Loader",  
00040         "JetSignalSelectorTool/InitialEtCut",
00041         "JetFastKtFinderTool/KtFinder",
00042         #"JetCellCalibratorTool/CellCalibrator",
00043         "JetSignalSelectorTool/FinalEtCut",
00044         "JetSorterTool/Sorter" ]
00045 #
00046 #----------------------------------------------------------------------
00047 # AlgTool steering
00048 #----------------------------------------------------------------------
00049 #
00050 # -- JetTowerNoiseTool
00051 #Kt4TrackJets.DoNoise.towerContainer = "CombinedTower"
00052 
00053 # -- JetTrackSelectorTool
00054 Kt4TrackJets.Track4Loader.pTMin                  = 500.*MeV
00055 Kt4TrackJets.Track4Loader.TrackParticleContainer = "TrackParticleCandidate"
00056 Kt4TrackJets.Track4Loader.OutputCollectionName   = "Kt4TrackParticleJets"
00057 Kt4TrackJets.Track4Loader.ignoreMultivertices    = False
00058 Kt4TrackJets.Track4Loader.vertexContainer        = "VxPrimaryCandidate"
00059 #
00060 Kt4TrackJets.Track4Loader.removeIsolLeptons = True
00061 Kt4TrackJets.Track4Loader.electronContainer = "ElectronCollection"
00062 Kt4TrackJets.Track4Loader.muonContainer     = "StacoMuonCollection"
00063 Kt4TrackJets.Track4Loader.innerCone         = 0.01
00064 Kt4TrackJets.Track4Loader.electronCone      = 0.2
00065 Kt4TrackJets.Track4Loader.electronEtCut     = 5*GeV   
00066 Kt4TrackJets.Track4Loader.muonCone          = 0.2
00067 Kt4TrackJets.Track4Loader.muonEtCut         = 5*GeV 
00068 
00069 # -- JetKtFinderTool (defaults)
00070 Kt4TrackJets.KtFinder.BeamType = "PP"
00071 Kt4TrackJets.KtFinder.DistScheme = "DeltaR"
00072 Kt4TrackJets.KtFinder.RecomScheme = "E"
00073 Kt4TrackJets.KtFinder.RParameter = 0.4
00074 #
00075 # -- JetCellCalibratorTool (defaults)
00076 #Kt4TrackJets.CellCalibrator.CellCalibratorName = "H1WeightToolCSC12Kt4Topo"
00077 #
00078 # -- Initial signal selection
00079 Kt4TrackJets.InitialEtCut.UseTransverseEnergy = True
00080 # FIXME the following cut may need tuning!
00081 Kt4TrackJets.InitialEtCut.MinimumSignal       = 0*MeV #10*MeV
00082 #
00083 # -- Final signal selection
00084 Kt4TrackJets.FinalEtCut.UseTransverseEnergy = True
00085 # FIXME the following cut may need tuning!
00086 Kt4TrackJets.FinalEtCut.MinimumSignal       = 7.*GeV
00087 #
00088 # -- make sure jets are sorted
00089 Kt4TrackJets.Sorter.SortOrder="ByEtDown"
00090 #
00091 # -- Monitoring
00092 if doJetMonitoring:
00093     Kt4TrackJets.InputMonitor.ToolNames =     [ "JetMonitorTool/JetMon1" ]
00094     Kt4TrackJets.JetFinderMonitor.ToolNames = [ "JetMonitorTool/JetMon2" ]
00095     #Kt4TrackJets.CalibMonitor.ToolNames =     [ "JetMonitorTool/JetMon3" ]
00096     Kt4TrackJets.OutputMonitor.ToolNames =    [ "JetMonitorTool/JetMon4" ]
00097     
00098     Kt4TrackJets.InputMonitor.JetMon1.HistogramPath     = "KtTower/input"
00099     Kt4TrackJets.JetFinderMonitor.JetMon2.HistogramPath = "KtTower/jetfinder"
00100     #Kt4TrackJets.CalibMonitor.JetMon3.HistogramPath     = "KtTower/calib"
00101     Kt4TrackJets.OutputMonitor.JetMon4.HistogramPath    = "KtTower/output"
HiggsAnalysis/HiggsAnalysis-00-01-00/run/Kt4TrackJet_jobOptions.py
